ADJ Vizi Beam Hybrid 2R User Instructions

Also see for Vizi Beam Hybrid 2R: User manual

Contents

ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 22Vizi Beam Hybrid 2R System Menu1. Press the MODE/ESC button to access the main menu. Pressthe UP or DOWN buttons so that “Information” is highlighted, thenpress ENTER.2. Press the UP or DOWN buttons until “Time Information” is dis-played, press ENTER.3. Press UP or DOWN buttons, until “Lamp Time Password” is dis-played, and press ENTER.4. The “Lamp Time Password” is 038.5. Press ENTER or press MODE/ESC to exit.Clean Lamp Time - This will allow you to clear the lamp time run-ning time. Please clear the lamp running time every time you replacethe lamp. You need to put in the Lamp Time Password before doingthis. Please see the section before this.1. Press the MODE/ESC button to access the main menu. Pressthe UP or DOWN buttons so that “Information” is highlighted, thenpress ENTER.2. Press the UP or DOWN buttons until “Time Information” is dis-played, press ENTER.3. Press UP or DOWN buttons, until “Clear Lamp Time” is dis-played, and press ENTER.4. Either “Off” or “On” will be displayed, use the UP and DOWN but-tons to toggle between.5. Press ENTER to confirm your selection or press MODE/ESC toexit.Temperature Info - This will allow you to check the moving headtemperature.1. Press the MODE/ESC button to access the main menu. Pressthe UP or DOWN buttons so that “Information” is highlighted, thenpress ENTER.2. Press the UP or DOWN buttons until “Temperature Info” is dis-played, press ENTER.ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 37and stored using the fixture’s control board or by using an externalDMX controller. For detailed instructions on how to complete this taskplease see Section 12/ Page 39.Select Program – This function allows the user to select one of tenof the user defined built-in programs. This program is then accessedin “Function Mode” under “Program Run.”Edit Program – This function allows the user to edit the built-in pro-grams.Edit Scenes – This function allows the user to edit or define theactual scenes that are stored in the user defined built-in programsthat are accessed in the previous step.Rec Controller - The Vizi Beam Hybrid 2R features an integratedDMX recorder. Preprogrammed scenes can be transmitted to thefixture via any DMX compliant controller. This function allows thosescenes to be stored in to the fixture’s built-in memory andthen subsequently used to create the user-defined programs.Vizi Beam Hybrid 2R System Menu