ADJ Vizi Beam Hybrid 2R User Instructions

Also see for Vizi Beam Hybrid 2R: User manual

Contents

Vizi Beam Hybrid 2R System MenuADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 25tons to toggle between. Select “On” if you wish to activate this func-tion, or “Off” to deactivate.4. Press ENTER to confirm your selection or press MODE/ESC toexit.Max on at temp. - With this function you can set the inside tempera-ture from which the lamp will restrike after automatic shut off.1. Press the MODE/ESC button to access the main menu. Press theUP or DOWN buttons so that “Lamp Control” is highlighted, thenpress ENTER.2. Press the UP or DOWN buttons until “Max On at Temp” is dis-played, press ENTER.3. “113°F” or “45°C” should now be displayed. “113°F” representsthe temperature that the lamp will restrike at. The temperature that isrecommended is 113°F.4. Press ENTER to confirm your selection or press MODE/ESC toexit.Lamp off temp. - With this function you can set the inside tempera-ture at which point the lamp will shut off.1. Press the MODE/ESC button to access the main menu. Press theUP or DOWN buttons so that “Lamp Control” is highlighted, thenpress ENTER.2. Press the UP or DOWN buttons until “Max On at Temp” is dis-played, press ENTER.3. “266°F” or “130°C” should now be displayed. “266°F” or “130°C”represents the temperature that the lamp will automatically switch offat. The temperature that is recommended is 266°F.4. Press ENTER to confirm your selection or press MODE/ESC toexit.NOTE: When the temperature around the lamp is higher then thepreset value for longer then 5 mins, the unit will automaticallyshut Off the lamp. If the lamp is automatically shut off due toover heat, it can not be restriked automatically, it must be turnedADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 34played, press ENTER.3. Press ENTER to confirm your selection or press MODE/ESC toexit.Reset Colors - With this function you can reset the color wheel.1. Press the MODE/ESC button to access the main menu. Press theUP or DOWN buttons so that “Reset Function” is highlighted, thenpress ENTER.2. Press the UP or DOWN buttons until “Reset Colors” is displayed,press ENTER.3. Press ENTER to confirm your selection or press MODE/ESC toexit.Reset Gobos - With this function you can reset the gobo wheel.1. Press the MODE/ESC button to access the main menu. Press theUP or DOWN buttons so that “Reset Function” is highlighted, thenpress ENTER.2. Press the UP or DOWN buttons until “Reset Gobos” is displayed,press ENTER.3. Press ENTER to confirm your selection or press MODE/ESC toexit.Reset Shutter - With this function you can reset the shutter motor.1. Press the MODE/ESC button to access the main menu. Press theUP or DOWN buttons so that “Reset Function” is highlighted, thenpress ENTER.2. Press the UP or DOWN buttons until “Reset Shutter” is displayed,press ENTER.3. Press ENTER to confirm your selection or press MODE/ESC toexit.Reset Others - With this function you can reset all other motors.1. Press the MODE/ESC button to access the main menu. Press theUP or DOWN buttons so that “Reset Function” is highlighted, thenpress ENTER.Vizi Beam Hybrid 2R System Menu