6.8 TimerCount Down TimerYou can use this function to set how longthe cooking zone should operate for asingle cooking session.First set the heat setting for the cookingzone then set the function.To set the cooking zone: touchagain and again until the indicator of anecessary cooking zone comes on.To activate the function: touch ofthe timer to set the time (00 - 99minutes). When the indicator of thecooking zone starts to flash slowly thetime counts down.To see the remaining time: set thecooking zone with . The indicator ofthe cooking zone starts to flash quickly.The display shows the remaining time.To change the time: set the cookingzone with . Touch or .To deactivate the function: set thecooking zone with and touch . Theremaining time counts back to 00. Theindicator of the cooking zone goes out.When the time comes to anend, the sound operates and00 flashes. The cookingzone deactivates.To stop the sound: touch .CountUp TimerYou can use this function to monitor howlong the cooking zone operates.To set the cooking zone: touchagain and again until the indicator of anecessary cooking zone comes on.To activate the function: touch ofthe timer. comes on. When theindicator of the cooking zone starts toflash slowly the time counts up. Thedisplay switches between andcounted time (minutes).To see how long the cooking zoneoperates: set the cooking zone with .The indicator of the cooking zone startsto flash quickly. The display shows howlong the zone operates.To deactivate the function: set thecooking zone with and touch or. The indicator of the cooking zonegoes out.Minute MinderYou can use this function as a MinuteMinder when the hob is activated andthe cooking zones do not operate. Theheat setting display shows .To activate the function: touch .Touch or of the timer to set thetime. Cooking zones display deactivatesautomatically after 10 seconds. Whenthe time comes to an end, the soundoperates and 00 flashes.To stop the sound: touch .To deactivate the function: activate fora short time and deactivate left frontcooking zone.The function has no effecton the operation of thecooking zones.6.9 PauseThis function sets all cooking zones thatoperate to the lowest heat setting.The function does not stop the timerfunctions.Press to activate the function.comes on. The heat setting is loweredto 1.To deactivate the function: press .The previous heat setting comes on.If you change the heatsetting, the function stopsand the display shows thenew heat setting.6.10 LockYou can lock the sensors on the hobwhile cooking zones operate.Set the heat setting first.www.aeg.com14