AEG CIB6733ACM User Manual

Auto‐maticlightBoil‐ing1)Frying2)Mode H6 On Fanspeed 2Fanspeed 31) The hob detects the boiling process and acti‐vates fan speed in accordance with automaticmode.2) The hob detects the frying process and acti‐vates fan speed in accordance with automaticmode.3) This mode activates the fan and the light anddoes not rely on the temperature.Changing the automatic mode1. Deactivate the appliance.2. Touch until you hear a beep andkeep it pressed until you hear thesecond beep.3. Touch for 3 seconds until orcomes on.4. Touch until H and a digit (0 - 6)comes on. H5 is the default setting.5. Touch of the Timer to select thedesired mode (H0 - H6). The chosenmode activates automatically after 10seconds.To operate the hood directlyon the hood panel deactivatethe automatic mode of thefunction.When you finish cooking anddeactivate the hob, the hoodfan may still operate for acertain period of time. Afterthat time the systemdeactivates the fanautomatically and preventsyou from accidentalactivation of the fan for thenext 30 seconds.Operating the fan speed manuallyYou can also operate the functionmanually. To do that touch when thehob is active. This deactivates automaticoperation of the function and allows youto change the fan speed manually. Whenyou press you raise the fan speed byone. When you reach an intensive leveland press again you will set fan speedto 0 which deactivates the hood fan. Tostart the fan again with fan speed 1 touch.To activate automaticoperation of the function,deactivate the hob andactivate it again.Activating the lightYou can set the hob to activate the lightautomatically whenever you activate thehob. To do so set the automatic mode toH1 – H6.The light on the hooddeactivates 2 minutes afterdeactivating the hob.6.14 Power managementfunction• All cooking zones are connected. Seethe illustration.• The hob and both ovens areconnected to one phase.• The phase has a maximum electricityload.• The function divides the power in theappliance. The oven is moreimportant than the hob.• The function activates when the totalelectricity load in the appliance isexceeded.• The function reduces the power of thecooking zones to prevent a circuitoverload.• The heat setting display of thereduced zones changes between twolevels.www.aeg.com16