AEG CIB6733ACM User Manual

CAUTION!Make sure that the longerfixing wire is in the front. Theends of the two wires mustpoint to the rear. Incorrectinstallation can causedamage to the enamel.12.5 Removing and cleaningthe door glasses - top ovenThe door glass in yourproduct can be different intype and shape from theexamples you see in theimage. The number ofglasses can also bedifferent.1. Open the door.2. Hold the door trim on the top edge ofthe door at the two sides and pushinwards to release the clip seal.1213. Pull the door trim to the front toremove it.4. Remove the glass panels.To install the panels, do the same stepsin reverse.12.6 Removing and cleaningthe door glasses - main ovenThe door glass in yourproduct can be different intype and shape from theexample you see in theimage. The number ofglasses can also bedifferent.1. Push the door trim at one side toremove it.12A2. Pull up the trim.3. Remove the glass panels.To replace the glass panels,do the same steps inreverse. Before you lowerthe trim, attach the A trimpart to the door. Refer to theimage.12.7 Replacing the lampWARNING!Risk of electric shock.The lamp can be hot.1. Turn off the oven. Wait until the ovenis cold.2. Disconnect the oven from the mains.3. Put a cloth on the bottom of thecavity.The back lampThe lamp glass cover is atthe back of the cavity.1. Turn the lamp glass covercounterclockwise to remove it.2. Clean the glass cover.3. Replace the oven lamp with asuitable 300 °C heat-resistant ovenlamp.Use the same oven lamp type.4. Install the glass cover.www.aeg.com34