Operation and Maintenance216 Aastra 415/430 as of R3.2syd-0344/1.6 – R3.2 – 09.2014 The first start is initiated once the key is released. The system now deletes the database. This is indicated with Pattern [19].Thereafter, the system changes to Normal Mode after a brief interruption. It nowstill remains up to five minutes until the communication server is accessible withWebAdmin.Tab. 99 Patterns while the database is deleted as a result of a first startTip:You can also initiate a first start of the communication server viaWebAdmin in the Maintenance / System reset ( =4e) view. There you canalso reset the sales channel in addition to a first start.6. 4. 4. 7 Resetting the IP addressThe IP address data is stored on the EIM card and is retained even after a first start.The following sequence only resets the IP address data of the communicationserver to the default values. All the other data is retained.Requirement:The system is in "Boot Command Mode", page 209.1. Press the pilot key several times with a short keypress (SC) until "F2" lights upred.2. Press the pilot key with a long keypress (LC) After 2 second keypress "F2" lights up green by way of confirmation. The IP address data is reset to the default values once the key is released. Thestartup then continues normally.Default values of the IP address data:• IP address: 192.168.104.13• Subnet mask: 255.255.255.0• Gateway: 0.0.0.0PatternNo. F0 F1 F2 F3 F4 SYS Dura-tion [s] Meaning[19] ~5 Deleting the databaseG G G –G – –
