Installation81Aastra 415/430 as of R3.2syd-0344/1.6 – R3.2 – 09.20144. 2. 2. 2 Aastra 415 rack-mounting setEquipment supplied:• 2 mounting plates for rack installation• Screw set4. 2. 2. 3 Aastra 430 rack-mounting setEquipment supplied:• 2 mounting plates for rack installation• Screw set• Fan4. 2. 3 Location requirementsThe following location requirements must be observed when positioning the com-munication server.HazardFailure to observe the location requirements can cause the communica-tion server to overheat, damaging electrical components and/or the sur-rounding area.An event message is generated if the heat dissipation is insufficient.Appropriate measures must be taken immediately to improve the heatdissipation, e.g. by providing the required clearances, lowering the ambi-ent temperature or installing the fan from the rack-mounting set (Aastra430 only).Tab. 34 Aastra 415/430 Location requirementsHeat radiation • Do not position in direct sunlight, near radiators or near other heating sourcesEMC • Do not position in strong electromagnetic fields of radiation(e.g.near x-ray equipment, welding equipment or similar).Heat dissipation • Do not place any objects on top of the communication server.• Observe the clearance requirements for wall mounting and desktop installation (seeFig. 12 and Fig. 13).• In a rack-mounted installation the space to the left and right between the communicationserver and the wall of the 19” rack must remain empty. The installation of a fan is alsomandatory for the Aastra 430.Environment • Ambient temperature 5 °C...45 °C• Relative humidity 30…80%, non-condensing
