Accton Technology EtherDuo-PS EN2024-6 User Manual
                                                                                                                         | |
Contents
| 
AppleTalk7Advanced Setup and ManagementThis section describes the configuration changes which can be made to your PrintServer device.Changing the Device ConfigurationWindows SoftwareChapter 8 - Management Tools describes the general-purpose management toolswhich can be used to configure and manage your Print Server. All of these programsrequire a version of Microsoft Windows. The BiAdmin program, which requiresWindows 95 or Windows NT, allows access to ALL settings, not just thoseimportant in the AppleTalk environment.Macintosh SoftwareIn AppleTalk, you can use SimpleText to edit the Print Server’s CONFIG file andthe supplied PSTool program to send it to the Print Server. The procedure is asfollows:1. Copy the following files from the Utility\Apple folder on the CD-ROM to anappropriate folder on your hard disk.PSToolCONFIG.xxxSelect the appropriate CONFIG file for your model as follows:config.1p Single parallel port modelconfig.2p1s Two parallel ports, 1 serial portconfig.3p Three parallel ports2. Use Chooser to select the desired Print Server.3. Double click the CONFIG file, and edit it. The file should look like the examplebelow, but may vary depending on your model.begin CMD0001 Device Name: SCxxxxxx3000 Apple Zone : *3001 Printer Type (P1): LaserWriter3002 Printer Type (P2) LaserWriter3003 Printer Type (SP): LaserWriter3004 Printer Type (P3) LaserWriter3101 AP_PCOMM1: No3102 AP_PCOMM2: No3103 AP_PCOMM3: No3104 AP_PCOMM4: NoSerial Port Configuration0030 Baud Rate: 96000031 Stop Bits: 10032 Parity: None0033 Data Bits: 80034 Handshake: HARDWARE9002The appropriate values for each line are described in the following sectionAppleTalk Settings. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine