Troubleshooting91Printing - GeneralProblemNo. 1When using 10BaseT cabling, the Print Server unit does notwork.SolutionNo. 2Check the Hub’s link LED for the port to which the Print Server isconnected. If it is off, there is a problem in the network cable. If using10BaseT or 100BaseT, check the LED next to the connector. Itshould be on if the network connection is OK.ProblemNo. 2A printing device connected to the a Print Server port cannotprint or prints garbage.SolutionNo. 2Check the following:• Cable connection between Print Server and printer.• Serial port configuration, if a serial device.• Printer driver in the application program or Windows matches theprinter.ProblemNo. 3The Configuration button on the Printer Status screen in BiAdminis grayed out, even though my printer in bi-directional.SolutionNo. 3The button is unavailable if the printer is busy. You must wait untilthe printer is idle.
