Print Server User’s Guide52Software ConfigurationWindows 95/NT 4.0This procedure must be carried out on every workstation requiring access to the PrintServer’s printers. The Print Server driver must be installed first. The process isidentical in Windows 95 and Windows NT 4.0. The sample screens are fromWindows 95.Before proceeding, check the following:• Print Server is ON and configured (if using TCP/IP)• Printer(s) connected to the Print Server, and on-line.• LAN is operational and using the appropriate protocol (either TCP/IP orNetBEUI).First Port Configuration1. Go to StartËSettingsËPrinters. Invoke the Add Printer Wizard.2. Select the Local printer (My Computer on NT) option.3. Choose the Printer Model on the Print Server’s first port.4. Select PrintServer as the port in the Select Port screen.5. Select the Configure Port button. The following Configure Print Server screenwill appearFigure 7 TCP/IP Configuration (Win95 PtP)6. Enter the configuration information as detailed below.IP Address Enter the IP address that was assigned to the PrintServerSelect Device Port Select the Print Server port that the printer is connectedto (e.g. Parallel port 1).
