Altos G540 Installation Configuration Guide 6Below is Altos G540 OS certification matrix:Operating System ServicePack Status NoteWindows Server 2008 Enterprise x64Edition N/A Certified 1, 2, 3Windows Server 2008 EnterpriseEdition N/A Certified 1, 2, 3Windows Server 2003 R2 Enterprisex64 Edition SP2 CertifiedWindows Server 2003 R2 EnterpriseEdition SP2 CertifiedWindows 2000 Advanced Server SP4 TestedRed Hat Enterprise Linux 4.0 EM64T Update3 TestedRed Hat Enterprise Linux 4.0 Update3 TestedSUSE Linux Enterprise Server 10EM64T N/A CertifiedSUSE Linux Enterprise Server 10 N/A CertifiedSUSE Linux Enterprise Server 9 EM64T SP3 CertifiedSUSE Linux Enterprise Server 9 SP3 CertifiedNetWare 6.5 SP5 CertifiedNOTE1. Altos G540 BIOS P17 (or later) is required to support Windows Server2008.NOTE2. This Windows Server 2008 certification also applies to Standard Editionand Web Server 2008.NOTE3. EasyBUILD 8.0 build 200 (or later) can support Windows Server 2008.The drivers required for the OS installation can be found on the EasyBUILD 7.1build 200 (or later). We suggest that you use the drivers contained in theEasyBUILD 7.1 build 200 (or later), as these drivers are tested and qualified byAcer.There are two ways you can get the drivers. You can either make diskettesfrom EasyBUILD 7.1 build 200 (or later), or put it in the optical drive and searchthe driver directly.NOTE. In this section, we assume the OS is installed on the HDD connected tothe onboard SATA RAID, LSI 1068 SAS daughter card or LSI MegaRAID SAS8300XLP.Windows Server 2008 Enterprise x64 Edition Installation (withLSI MegaRAID SAS 8300XLP)Below information describes how to manually install Windows Server 2008OS INSTALLATION TIPS
