Altos G540 Installation Configuration Guide 52Onboard USB 2.0 N/A OS built-inIOAT N/A N/ASoftware RequiredThe management utility for MegaRAID SAS 8300XLP can be found in theEasyBUILD 7.1 build 200 (or later).Software Version Directory on EasyBUILDMegaRAID StorageManager1.13-07 \APP\G540\RAID\LSI8300XLP\StorageManager\Linux\Configuring MegaRAID SAS 8300XLPPlease refer to the Appendix C. for the MegaRAID SAS 8300XLP configuration.Installation Tips1. Since Red Hat Enterprise Linux 4.0 EM64T Update3 cannot recognize theMegaRAID SAS 8300XLP, you need to make a driver diskette from theEasyBUILD 7.1 build 200 (or later) first before the installation.2. Type linux dd when the prompt boot: appears at the start.3. Please select the fd0 as the Driver Disk Source.4. Follow the instruction to load the MegaRAID driver from the driverdiskette.5. At the Package Installation Defaults, select Customize software packagesto be installed.6. At the Package Group Selection step, select Development Tools underDevelopment.7. Follow the normal procedure to finish the installation.Gigabit Ethernet Driver Installation1. You can find the Intel 82563EB driver in EasyBUILD 7.1 build 200. Pleaserefer to Directory of EasyBUILD in Driver Required section for 82563EBand copy the driver from the EasyBUILD 7.1 build 200 to HDD first.# mount /media/cdrecorder# cp –R /media/cdrecorder/Disk/G540/NIC/Intel/pro1000.lx/. /tmp2. Change the directory to the driver source and install the driver# cd /tmp/src/# make install# insmod e1000.ko3. Run the kudzu utility, it will auto detect the Intel 82563EB networkcontroller and help you to configure it.
