Altos G540 Installation Configuration Guide 26IOAT Driver Installation1. For Base System Device, it should be the onboard IOAT device. You couldfind the driver in EasyBUILD 7.1 build 200.2. Right-click on the Base System Device and select Update Driver.3. Select No, not this time. Do not connect to Windows Update to search thedriver.4. Select Install from a list or specific location (Advanced).5. Select Search the best driver these locations and check Include thislocation in the search.6. Click on Browse and specify the path for the driver. Please refer to theDirectory on EasyBUILD in Driver required section for IOAT driver.7. Click on Next and follow the instruction to finish the driver update.8. After installing the driver, you would see Intel(R) 5000 Series ChipsetsIntegrated Device – 1A38 listed in System devices.ATI ES1000 Driver Installation1. Windows will treat onboard VGA as Standard VGA device. You can findthe ATI ES1000 driver in EasyBUILD 7.1 build 200. Please insert theEasyBUILD 7.1 build 200 into the optical drive.2. Expand Drivers -> Altos G540 -> Graphics adapters -> ATI ES1000, selectWindows Server 2003 x64 and click on Setup.3. Follow the instruction to install the VGA driver and reboot the serverafter the driver is installed.4. After installing the driver, you would see ATI ES1000 listed in Displayadapters.Microsoft Scalable Networking Pack InstallationYou can find the Microsoft Scalable Networking Pack for Windows Server 2003x64 in the Microsoft website:http://www.microsoft.com/downloads/details.aspx?FamilyID=778ee6fe-5359-4c2f-b89d-f35f2b1b83cd&DisplayLang=en1. Download the SNP from Microsoft website.2. Double-click on the downloaded file to run the installation program.3. Follow the instruction to install the SNP and reboot the server after theSNP is installed.4. After installing the SNP, you will see Hotfix for Windows Server 2003(KB912222) listed in Add or Remove Programs (you need to check theShow updates in Add or Remove Programs first).
