Altos G540 Installation Configuration Guide 706. Follow the instructions to the Installation Settings.7. At the Installation settings, select the Software.8. Check C/C++ Compiler and Tools under Development to add C/C++compiler tools.9. Click on Details, change Filter from Patterns to Package Groups.10. Select Source under Development in the left window and check kernel-source in the right window to add kernel-source.11. After you add the kernel-source and C/C++ Compiler and Tools, pleaseclick on Accept and follow the instruction to complete the installation.Gigabit Ethernet Driver InstallationThe NIC driver installation is the same as LSI MegaRAID SAS 8300XLP installed.Please refer to the SuSE Linux Enterprise Linux 10 Installation (with LSIMegaRAID SAS 8300XLP) Gigabit Ethernet Driver Installation section.MegaRAID Storage Manager InstallationThe MegaRAID Storage Manager installation is the same as LSI MegaRAID SAS8300XLP installed. Please refer to the SuSE Linux Enterprise Linux 10 Installation(with LSI MegaRAID SAS 8300XLP) MegaRAID Storage Manager Installationsection.SUSE Linux Enterprise Server 10 Installation (with LSI MegaRAIDSAS 8708ELP)Below information describes how to manually install SUSE Linux EnterpriseServer 10 on Altos G540 with LSI MegaRAID SAS 8708ELP.Drivers RequiredFor SUSE Linux Enterprise Server 10 Installation, the following device drivers arerequired.Device Version Directory on EasyBUILDLSI MegaRAID SAS8708ELP00.00.03.09 N/AOnboard Intel5000P ChipsetN/A OS built-inOnboard Intel82563EB GigabitEthernet7.3.15-NAPI \Disk\G540\NIC\Intel\pro1000.lxOnboard ATIES1000N/A OS built-inOnboard USB 2.0 N/A OS built-inIOAT N/A N/A
