Altos G540 Installation Configuration Guide 78SUSE Linux Enterprise Server 9 Service Pack 3 Installation (withLSI MegaRAID SAS 8300XLP)Below information describes how to manually install SUSE Linux EnterpriseServer 9 Service Pack 3 on Altos G540 with LSI MegaRAID SAS 8300XLPinstalled.Drivers RequiredFor SUSE Linux Enterprise Server 9 Service Pack 3 Installation, the followingdevice drivers are required.Device Version Directory on EasyBUILDLSI MegaRAID SAS8300XLP00.00.03.01 \Disk\G540\RAID\LSI8300XLP\SLES9SP3\Onboard Intel5000P ChipsetN/A OS built-inOnboard Intel82563EB GigabitEthernet7.0.38-NAPI \Disk\G540\NIC\Intel\pro1000.lxOnboard ATIES1000N/A OS built-inOnboard USB 2.0 N/A OS built-inIOAT N/A N/ASoftware RequiredThe management utility for MegaRAID SAS 8300XLP can be found in theEasyBUILD 7.1 build 200 (or later).Software Version Directory on EasyBUILDMegaRAID StorageManager1.13-07 \APP\G540\RAID\LSI8300XLP\StorageManager\Linux\Configuring LSI MegaRAID SAS 8300XLPPlease refer to the Appendix C. for the LSI MegaRAID SAS 8300XLPconfiguration.Installation Tips1. Since SUSE Linux Enterprise Server 9 Service Pack 3 cannot recognize theLSI MegaRAID SAS 8300XLP, you need to make a driver diskette from theEasyBUILD 7.1 build 200 first before the installation.2. Boot the system form SUSE Linux Enterprise Server 9 Service Pack3bootable CD.3. When you see the boot menu on the screen, press F6, select Installationthen press Enter to continue.4. Follow the instruction to load the LSI MegaRAID SAS 8300XLP driver fromthe driver diskette.
