71 Altos G540 Installation Configuration GuideSoftware RequiredThe management utility of LSI MegaRAID SAS 8708ELP is required.Software Version Directory on EasyBUILDMegaRAID StorageManager2.21-00 N/AConfiguring LSI MegaRAID SAS 8708ELPPlease refer to the Appendix D. for the LSI MegaRAID SAS 8708ELPconfiguration.Installation Tips1. Please prepare the driver diskette for MegaRAID SAS 8708ELP before theinstallation.2. Boot the system form SUSE Linux Enterprise Server 10 bootable CD.3. When you see the boot menu on the screen, press F5 and select Yes.4. Please insert the driver disk into the floppy drive then press Enter tocontinue the installation.5. The system will automatically load the driver from floppy. After loadingthe driver, select OK and Back to return the installation procedure.6. Follow the instructions to the Installation Settings.7. At the Installation settings, select the Software.8. Check C/C++ Compiler and Tools under Development to add C/C++compiler tools.9. Click on Details, change Filter from Patterns to Package Groups.10. Select Source under Development in the left window and check kernel-source in the right window to add kernel-source.11. After you add the kernel-source and C/C++ Compiler and Tools, pleaseclick on Accept and follow the instruction to complete the installation.Gigabit Ethernet Driver InstallationThe NIC driver installation is the same as LSI MegaRAID SAS 8300XLP installed.Please refer to the SuSE Linux Enterprise Linux 10 Installation (with LSIMegaRAID SAS 8300XLP) Gigabit Ethernet Driver Installation section.MegaRAID Storage Manager InstallationThe MegaRAID Storage Manager installation is the same as LSI MegaRAID SAS8300XLP installed. Please refer to the SuSE Linux Enterprise Linux 10 Installation(with LSI MegaRAID SAS 8300XLP) MegaRAID Storage Manager Installationsection.
