59 Altos G540 Installation Configuration Guide4.0 Update 3 on Altos G540 with LSI 1068 SAS IM.Drivers RequiredFor Red Hat Enterprise Linux 4.0 Update 3 Installation, the following devicedrivers are required.Device Version Directory on EasyBUILDLSI 1068 SAS 3.02.77 \Disk\G540\onboard\SAS\RHEL4U3\Onboard Intel5000P ChipsetN/A OS built-inOnboard Intel82563EB GigabitEthernet7.0.38-NAPI \DiskG540\NIC\Intel\pro1000.lxOnboard ATIES1000N/A OS built-inOnboard USB 2.0 N/A OS built-inIOAT N/A N/ASoftware RequiredThe management utility for LSI 1068 SAS can be found in the EasyBUILD 7.1build 200 (or later).Software Version Directory on EasyBUILDMyStorage 3.00.05 \APP\G540\SAS\LSI1068\MyStorage\Linux\Configuring LSI 1068 SASPlease refer to the Appendix B. for the LSI 1068 SAS IM configuration.Installation TipsAlthough Red Hat Enterprise Linux 4.0 Update 3 can detect the LSI 1068 SASautomatically, we still need to update the driver during the installation. If youdon’t update the driver, the LSI MyStroage management software will notrecognize the LSI 1068 SAS.1. Please make the driver diskette from the EasyBUILD 7.1 build 200 (or later)first before the installation.2. Type linux dd updates when the prompt boot: appears at the start.3. Please select the fd0 as the Driver Disk Source.4. Follow the instruction to load the LSI 1068 SAS driver from the driverdiskette.5. At Update Disk Source, please select fd0 and follow the instruction toupdate it.6. At the Package Installation Defaults, select Customize software packagesto be installed.
