Altos G540 Installation Configuration Guide 48(with LSI MegaRAID SAS 8300XLP) Intel PROSet Utility Installation section.Windows 2000 Advanced Server SP4 Installation (with onboardSATA RAID)Below information describes how to manually install Windows 2000 AdvancedServer SP4 on Altos G540 with onboard SATA RAID.Drivers RequiredFor Windows 2000 Installation, the following device drivers are required.Device Version Directory on EasyBUILDOnboard SATARAID6.0.0.1002 \Disk\G540\onboard\SATARAID\ws2k_ws2K3\Onboard Intel5000P Chipset7.4.0.1005 \Disk\G540\onboard\Chipset\Onboard Intel82563EB GigabitEthernet9.3.39 \Disk\G540\NIC\Intel\pro1000.net\ws032k\Onboard ATIES10008.24.3.0 \Disk\G540\onboard\VGA\W2K3\Onboard USB 2.0 5.0.2195.6717 OS built-inIOAT 1.2.52.0 \Disk\G540\onboard\IOAT\WS2K3Software RequiredThe management utility for onboard SATA RAID and NIC can be found in theEasyBUILD 7.1 build 200 (or later).Software Version Directory on EasyBUILDMatrix StorageManager6.0.0.1002 \APP\G540\RAID\SATARAID\WindowsIntel PROSet Utility 10.4.4.2 \APP\G540\NIC\PROSETDX\2KXPWS03\Configuring onboard SATA RAIDPlease refer to the Appendix A. for the onboard SATA RAID configuration.Installation Tips1. As Windows 2000 can’t recognize the onboard SATA RAID, you need tomake a driver diskette from the EasyBUILD 7.1 build 200 first before theinstallation.2. Press F6 at the beginning of installation for providing the driver diskettefor the onboard SATARAID.3. Select “Intel(R) 631xESB/632xESB SATA RAID Controller(Server/Workstation ESB2)” as target driver4. After loading the SAS driver from diskette, follow the normal procedureto finish the installation.
