4-6AAA-130SA Series Installation and Hardware GuideInstalling Adaptec CI/O Management Softwarefor Windows NT ServerNote: The Adaptec CI/O Management Software installationprocess automatically installs both CI/O server and clientcomponents on your Windows NT Server. Before you startthe Adaptec CI/O Management Software, be sure that com-munication with the server via the network is already estab-lished. (See the documentation provided with your TCP/IPsoftware for instructions on establishing communications,and also Hints for Establishing Communications With YourServer on page 6-3.)Follow these steps to install the Adaptec CI/O Management Soft-ware for Windows NT:1 Start Windows NT.2 Insert the Adaptec CI/O Management Software CD-ROM inyour CD-ROM drive.3 Select Start and then Run, type the following and press Enter:x:\win_nt\disk1\setup.exewherex is the CD-ROM drive letter.4 Follow the directions that appear on the screen.5 When installation is complete, reboot the system. The follow-ing NT Services start automatically in the background:CIO Array Management ServiceCIOArrayManager RPC CommandCIOArrayManager RPC EventPCIOArrayManager RPC EventNobleNet PortmapperNote: These NT Services are configured to start auto-matically at boot time. After installation you can startor stop these services through the Services icon in theWindows NT Control Panel.
