5-9Installing Software on a Novell NetWare ServerInstalling the Adaptec CI/O ManagementSoftware for Novell NetWareThe Adaptec CI/O Management Software for Novell NetWare doesnot support NetWare installations from CD-ROM peripheralsmounted as a NetWare volume. Additionally, the Adaptec CI/OManagement Software for Novell NetWare only supports installa-tions from CD-ROM DOS drive x:, where x is the CD_ROM driveletter. (For information on using a CD-ROM drive on a NetWare server,see Appendix C, Using a CD-ROM Drive.)Note: Before you start the Adaptec CI/O Management Soft-ware, be sure that communication with the server via thenetwork is already established. (See the documentation pro-vided with your TCP/IP software for instructions on estab-lishing communications, and also Hints for EstablishingCommunications With Your Server on page 6-3.)Follow these steps to install the Adaptec CI/O Management Soft-ware for Novell NetWare:1 Insert the Adaptec CI/O Management Software CD-ROM inyour CD-ROM drive.2 The CD-ROM drive must be added to the search path. Fromthe NetWare colon prompt (:), type the following and pressEnter:search addx:\netware\disk2wherex is the CD-ROM drive letter.3 From the NetWare colon prompt (:), type the following andpress Enter:loadx:\netware\disk2\nwsetupwherex is the CD-ROM drive letter.