5-10AAA-130SA Series Installation and Hardware Guide4 From the NWSETUP Installation menu, select DefaultInstallation or Custom Installation (press F1 for help).Note: When installing Adaptec CI/O ManagementSoftware on an array 2 GBytes or larger, the installprogram erroneously reports the following message“Low Disk Space–Installation May Not Complete–Press Escape to Continue.” Ignore this message andcontinue with installation.5 At the end of the installation process, select Yes when you areprompted to update theautoexec.ncf file. (This adds theappropriate NLM command lines to the file so that all softwareis automatically loaded when the server starts.)See the Adaptec CI/O Management Software User’s Guide for informa-tion on using the Adaptec CI/O Management Software to add,delete, or manage your arrays from your server console.Adaptec CI/O Management Software Installation Hintsn For communications supported over TCP/IP, thetcpip.nlmmust be loaded and the IP protocol must be bound to a valid IPaddress. The IP protocol generally needs to be bound to anethernet frame type, ETHERNET_II, which must be specifiedwhen loading the LAN driver. A LAN driver can be loadedmultiple times for different ethernet frame types.n Command lines similar to the following are automaticallyadded to theautoexec.ncf file when you run thenwsetuputility:## NWSETUP LAST UPDATE XX-XX-XX#RPCSTARTIOMGR.NCFIOMGRRPC.NCFr
