A-3Configuring the AAA-13xSA RAID Card with SCSISelectStarting the SCSISelect UtilityTo start SCSISelect, press the F6 key when the following promptappears when you turn on or reboot your computer:Press for SCSISelect (TM) Utility!The menu that appears displays the options Configure/View HostAdapter Settings and SCSI Disk Utilities, as shown in Figure A-1.Using SCSISelect MenusTo select a SCSISelect menu option, move the cursor to the optionwith the ↑ and ↓ keys, then press Enter. In some cases, selecting anoption displays another menu. You can return to the previous menuat any time by pressing Esc.To restore the original SCSISelect default values, press F6 from themain SCSISelect screen. To toggle the display between color andmonochrome modes, press F5 from the main SCSISelect screen (thisfeature may not work on all monitors).Exiting SCSISelectTo exit SCSISelect, press Esc until a message prompts you to exit (ifyou changed any host adapter settings, you are prompted to savethe changes before you exit). Select Yes to exit, then press any key toreboot the computer. Any changes you made in SCSISelect take effectafter the computer boots.Adaptec AAA-13x/ARO-113x SCSISelect(TM) Utility v2.00Arrow keys to move cursor, to select option, to exit (*=default)Would you like to configure the PCI device, or run theSCSI disk utilities? Select the option and press .Press to switch between color and monochrome modes.AAA-13x/ARO-113x at Bus:Channel 00:COptionsConfigure/View Host Adapter SettingsSCSI Disk UtilitiesFigure A-1. SCSISelect Menu
