4-22controller Commandscontroller show channelsTo show all of the channels on a controller and the associatedcharacteristics of each channel, use the controller showchannels command. See the installation guide for your controllerto determine the number of channels it actually supports.Syntaxcontroller show channelsExamplesIn the following example, the system displays the channels on thecurrently opened controller:AAC0> controller show channelsExecuting: controller show channelsCh# Host ID Targets Type Max Usage--- ------- ------- --------- ---------0 7 15 NoInfo NoInfo1 7 15 NoInfo NoInfo2 7 15 NoInfo NoInfo3 7 15 NoInfo NoInfoThe following example displays the channels on the currentlyopened controller:AAC0> controller show channelsExecuting: controller show channelsCh# Host ID Targets Type Max Usage--- ------- ------- --------- ---------0 7 15 NoInfo NoInfo1 7 15 NoInfo NoInfo2 7 15 NoInfo NoInfo3 7 15 NoInfo NoInfoThe following sections provide more information on the items thatthe controller show channels command displays.The Ch# and Host ID ItemsThe Ch# item displays the number of the channel on the controller.In the example there are four channels on the currently openedcontroller. See the installation guide for your controller todetermine the number of channels it actually supports.The Host ID item displays the SCSI device ID of the host controller,which in the example is 7 for all channels.
