1-14IntroductionThe Ctr and State ItemsThe Ctr item displays the ID number of the array associated withthe task. In the example, the array’s ID is 0 (zero).The State item displays the state of the task along with a runningpercentage value that indicates the progress of the currentlyrunning task. The item shows the percentage in tenths of a percentincrements. The currently running task is complete when the Stateitem displays 100%.MMR Merge a broken mirror task.The array merge command causes the MMR value todisplay.MSC array scrub task. The array scrub command causes theMSC value to display.NTF array format task with an NTFS file system specified. Thearray format command with the /file_system switchset to NTFS causes the NTF value to display.R5R RAID-5 rebuild task.R5S RAID 5 array create task with the scrub method specified. Thearray create raid5 command with the /scrub switchspecified causes the R5S value to display.RCF array reconfigure task. The array reconfigure commandcauses the RCF value to display.SCV Verify all blocks on a SCSI disk device task. The diskverify command causes the SCV value to display.SCZ Clear an entire SCSI disk task. The disk zero commandcauses the SCZ value to display.SVR Verify all blocks and repair bad blocks on a SCSI disk devicetask. The disk verify command with the /repair switchcauses the SVR value to display.Table 1-7 Function Values (Continued)Value Meaning
