9-32enclosure Commandsenclosure show slotTo display the status of a specific device slot on a specific SAF-TEenclosure management device, use the enclosure show slotcommand. You can also use this command to display the status ofall device slots on the enclosure management device or devices.Syntaxenclosure show slot [{enclosure}] [{slot}]Parameters{enclosure}Specifies the ID associated with the enclosure managementdevice for which you want to display device slot statusinformation. For this version, the controller supports amaximum of eight enclosure management devices on each bus.If you do not specify an ID, the command displays the deviceslot status for all enclosure management devices connected tothe controller.{slot}Specifies the unit number associated with the device slotwhose status you want to display. This integer can range from0 to 15 inclusive. Typically, the slot unit number is limited bythe physical number of device slots in the enclosuremanagement device.If you do not specify a unit number, the command displaysthe status for all device slots on the enclosure managementdevice or devices.
