Shutting Down the iSCSI Storage Appliance104 Snap Server 700i Series User’s GuideShutting Down the iSCSI Storage ApplianceYou can use Adaptec Storage Manager to shut down your iSCSI Storage Appliance.You might want to do this to export a pool to another iSCSI Storage Appliance (seepage 91) or complete maintenance tasks.Note Users can’t access data on pools or logical devices on the appliance until it’srestarted (see the following section).To shut down the appliance:1 In the Enterprise View, select the iSCSI Storage Appliance.2 In the Actions menu, select Shut down iSCSI Storage Appliance.3 Click Yes to shut down the appliance.The appliance shuts down.Shutting Down and Restarting the iSCSI Storage ApplianceTo shut down and restart the appliance using Adaptec Storage Manager:1 In the Enterprise View, select the iSCSI Storage Appliance.2 In the Actionsmenu, select Restart iSCSI Storage Appliance.3 The appliance restarts.Note Restarting may take several minutes, during which time the data on theappliance won’t be available.Changing the iSCSI Storage Appliance’s SettingsYou can use Adaptec Storage Manager to change the network, date, and timesettings for your iSCSI Storage Appliance.To change the network settings using Adaptec Storage Manager:1 In the Enterprise View, select the iSCSI Storage Appliance.2 In the Actionsmenu, select Configure iSCSI storage appliance.The wizard opens to the Configure iSCSI Storage Appliance step.3 Edit the appliance settings, following the instructions in “Step 2: Configuring theiSCSI Storage Appliance” on page 36.4 Click Apply, then click Cancel to close the wizard.