iSCSI Configuration for Microsoft Windows164 Snap Server 700i Series User’s GuideConfiguring the QLogic QLA4050 and QLA4052 iSCSI Initiators forMicrosoft WindowsRequirements• Windows 2003, Windows 2000, Windows XP installed server.• Microsoft iSCSI Software InitiatorInstalling the Adapter1 Install the QLA4050/4052 adapter on a system running Windows 2003 orWindows 2000 Server or Windows XP Professional SP3.2 Boot up the system and follow the Windows Found New Hardware dialog to loadthe associated driver software.3 Install SANSurfer, which came with the adapter.Configuring the QLA4050/QLA4052 iSCSI InitiatorQLogic's QLA4050/4052 is an iSCSI adapter that appears as a SCSI adapter insteadof a network adapter in Windows Device Manager. Before it can successfullyconnect to iSCSI targets, you must:• Set initiator parameters (for example, initiator name, alias, IP address).• Enter target information (for example, target portal information and target iSCSIname).• Configure the adapter’s BIOS. Refer to article 14837 on the Adaptec SupportKnowledgebase at www.adaptec.com.You can use either the SANSurfer Management application that came with theQLA4050/4052 or Microsoft’s iSCSI initiator applet to set initiator parameters andenter target information.
