Step 2: Configuring the iSCSI Storage Appliance36 Snap Server 700i Series User’s Guide3 Enter the host name or TCP/IP address of your iSCSI Storage Appliance, thenclick Add. The TCP/IP address appears on the front panel LCD display of yourSnap Server 700i Series.Note An iSCSI Storage Appliance can be associated with (or added to) only oneManagement Service at a time.If prompted, click OK, enter the Administrator password for the iSCSI StorageAppliance, then click Add. (You will only be prompted for a password if thisiSCSI Storage Appliance was added to another Management Service previously.)The default password is admin.The iSCSI Storage Appliance is added to Adaptec Storage Manager.Step 2: Configuring the iSCSI Storage ApplianceThe wizard comprises three configuration steps, listed in the left panel:• Configure iSCSI Storage Appliance• Create RAID pools• Provision StorageThis chapter explains the steps in the order in which they’re presented in thewizard.To configure your iSCSI Storage Appliance:1 Select the iSCSI Storage Appliance (shown as ‘OnTarget’ in the previous figure),then click Next.
