Avision FL-1507B User Manual
Also see for FL-1507B: User manualUser manualUser manual
                                                                                                       | |
User’s ManualMobile Scanning 766. Choose your desired [Network Name] (SSID) and click [Connect]. Wait for 60seconds for the connected status confirmation.After the Wi-Fi connection is successful, choose [Status] to check the [WAN IP]address is available from the selected network.6.2.3 Connect to a wireless access point using the WPSbuttonYou may connect the scanner to a WPS compatible wireless access point by pressing theWPS button on the back of the scanner.BEFORE YOU BEGINTo enable the WPS connection of your access point, please refer to theuser’s guide of your access point.Perform the following procedure to connect.1. Confirm your wireless access point/router has the WPS or AOSSTM symbol asshown below.2. Press the WPS button of your wireless access point. (You may refer to theuser’s guide of your access point/router for instructions on how to use the WPSbutton.) |
Related manuals for Avision FL-1507B
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine