Section 9: Setting Up - MacintoshAXIS 570/670 User’s Manual150MacintoshIn order to use any of the methods, you must assign an IP address tothe AXIS 570/570e as described inSetting Parameters, on page 153.Choosing a PrinterSelecting a PrinterThe method for choosing a printer varies depending on which versionof LaserWriter printer driver you are using.•The LaserWriter 7.0 driver assumes that you use a standard Post-Script driver, and cannot take advantage of any printer specificfeatures.•The LaserWriter 8.0 driver uses PPD files that contain printerdescriptions. This gives you full control over any features yourprinter might have.LaserWriter 7.0Printer DriverFollow the instructions below to choose a printer:1.SelectChooserfrom theApplemenu.2.Click theLaserWritericon.3.If your network has more than one zone, click on the zone youwant. If your network has no zones, this box does not appear.4.Click the name of the printer you want. The default AXIS570/570e printer names are shown as: AXIS_,where is the last six digits of the AXIS 570/570e serialnumber, and is LPT1, LPT2 and COM1 respectively. Forexample: AXIS100086_LPT1.5.Click theClosebox. This completes the configuration and closesthe Chooser.Repeat this procedure for each Macintosh computer on the networkusing the AXIS 570/570e.
