Appendix A: SNA Parameter Overview AXIS 570/670 User’s Manual212IBM Mainframe IBM AS/400Updating parametersThis is most easily done when installing the AXIS 570/670 using theInstallation Wizard in AXIS NetPilot, which requires a computerrunning Windows attached to your LAN.Alternatively, you can do the setting up using FTP, or HTTP from aWeb browser, or using extended IBM printer emulation. To setparameters using a Web browser, you first need to assign an IP addressto the AXIS 570/670.Using extended IBM printer emulation means setting up the AXIS570/670 by printing a file containing extended IBM emulationcommands to it after you have established communication with yourIBM host. The configuration is started by inserting the sequence%CONFIG+ in your text. To protect your settings, a password must beprovided. By default, the password is pass. You may then set theparameter values directly using the syntax shown below:H1_LU_NAME Host LU Name DEFAULT 5494 only This parameter defines the LU name ofthe AS/400 system that should matchthe Local location name(LCLLOCNAME), defined in the AS/400system. Issue the DSPNETA commandto view LCLLOCNAME.If a remote workstation for this PrintServer is already defined on the AS/400system, issue the DSPCTLD commandto ensure that this parameter matchesLCLLOCNAME. If the Local locationname is set to *NETATR, you shoulduse the DSPNETA command to viewLCLLOCNAME.The Host LU Name may comprise theletters A-Z and/or numerals 0-9, butmust begin with a letter. The lettersused should all be in UPPERCASE anda maximum of 8 characters are allowed.Parameter Name Default Emulation Description
