AXIS 570/670 User’s Manual Section 5: Setting Up - IBM Mainframe 87IBM MainframeSection 5 Setting Up - IBM MainframeThis section describes how to configure the AXIS 570/670 forprinting of SCS, 3270 and IPDS data streams using SNA and TCP/IPtransport protocols in the IBM Mainframe environment.Proceed to the setup section that is relevant to your networkenvironment, as described in the table below:Note: o IPDS is only supported by the AXIS 570e and AXIS 670e models.If you intend to operate your AXIS 570/670 in a multiprotocolenvironment, you should also proceed to the other relevant sections inthis manual, namely:Section 4 - Setting Up - AS/400Section 6 - Setting Up - NetWareSection 7 - Setting Up - WindowsSection 8 - Setting Up - OS/2Section 9 - Setting Up - MacintoshSection 10 - Setting Up - UNIXPrintingprotocol Data streams ActionSNASCSSNA Printing, on page 883270DSSNA Printing , on page 88IPDSSNA Printing , on page 88TN3270E(TCP/IP)SCSTCP/IP TN3270E Printing, on page 983270DSTCP/IP TN3270E Printing , on page 98IPDSTCP/IP TN3270E Printing , on page 98PPR/PPD(TCP/IP) IPDSPPR/PPD Printing - IPDS data streams , on page112
