AXIS 570/670 User’s Manual Section 4: Setting Up - AS/400 79IBM AS/400LPR/LPD PrintingThis section describes how to establish communication between anAXIS 570/670 and an AS/400, using TCP/IP LPR/LPD as a transportprotocol for the SCS data stream. The AS/400 must be runningOS/400 V3R1 or later with TCP/IP support installed and configured.Important! o When using LPR/LPD the AS/400 printer file settings will not besent to the AXIS 570/670. If you wish to retain a specificdocument style, font and orientation data must be embedded intoyour document.Configuration is performed in three separate stages:• Configuring the AXIS 570/670• Configuring the AS/400 Host• Verifying communicationConfiguring theAXIS 570/670Follow the instructions below to configure your AXIS 570/670 forLPR/LPD printing using a standard Web browser:1. Start a Web browser, e.g. Internet Explorer or Netscape Navigator.2. Enter the IP address or the host name of the AXIS 570/670 in thelocation field and press the ENTER key on your keyboard. Theinternal Web pages of the AXIS 570/670 appear. You may beasked to enter a user name and a password. The default values areroot and pass, respectively.3. Click the Configuration button.4. Select IBM BASIC CONFIGURATION from the header.5. Select your preferred system language from the System Languagedrop-down list.6. Select a laser twinax printer emulation from the PrinterEmulation drop-down list.