Section 3: Basic Installation AXIS 570/670 User’s Manual28Windows IBM Mainframe IBM AS/400UNIX NetWareOS/2MacintoshConnecting a printer to the Token Ring NetworkFollow the instructions below to connect a printer to the network viathe AXIS 670/670e print server.Caution! o Make sure that the AXIS 670/670e external power supply ismarked with the correct voltage! Refer to the Power supply tableon page 15.o DO NOT connect or disconnect the network cabling while AXIS670/670e is powered on.1. Switch off the printer and disconnect the AXIS 670/670e externalpower supply.2. Locate the serial number, found on the underside label of theAXIS 670/670e, and write it down. You will need this numberlater during the network configuration.3. Connect the printer to the LPT1, LPT2 or the COM1 port onthe AXIS 670/670e using an appropriate printer cable.4. Slide the Ring Speed switch towards 4 or 16 depending on thering speed of your network.5. Connect your AXIS 670/670e to the network using an ShieldedTwisted Pair (Media Type 1) or Unshielded Twisted Pair (MediaType 3) cable.6. Switch on the printer and connect the external power supply tothe AXIS 670/670e. The power indicator lights. If the networkindicator starts to flash, the AXIS 670/670e is successfullyconnected to the network.
