AXIS 570/670 User’s Manual Section 10: Setting Up - UNIX 155UNIXSection 10Setting Up - UNIXInstallation in the UNIX EnvironmentHaving performed the basic TCP/IP setup procedures as defined inAssigning an IP address, on page 36, you are now able to print ininteractive mode using LPR, FTP or Reverse Telnet protocols.However, should you require to integrate the AXIS 570/670 into yourhost spooler, you can use the Axis automatic installation scriptaxinstall. This utility software is resident on the AXIS 570/670 andcan be downloaded to your host using FTP, so no disks are required.The axinstall script is also available on the AXIS Online CD. Havingcompleted this operation, the printer connected to the AXIS 570/670will appear as though they are directly connected to the host printerspooler.If you intend to operate your AXIS 570/670 in a multiprotocolenvironment, you should also proceed according to one or more of thefollowing sections, as appropriate to your network.Section 4 Setting Up - AS/400, on page 49Section 5 Setting Up - IBM Mainframe, on page 87Section 6 Setting Up - NetWare, on page 115Section 7 Setting Up - Windows, on page 123Section 8 Setting Up - OS/2, on page 145Section 9 Setting Up - Macintosh, on page 149SNA
