Axis M3045-V User Manual

Also see for M3045-V: Installation guide User manual User manual Installation guide User manual

AXIS M3045-V Network CameraVideo• Highest Zipstream strength. High dandwidth reduction. Visidle quality degradation in not prioritized areas in many scenesLowest Zipstream strength is the default setting for the product. This configuration is very safe to use in all applications while stillreducing the dit rate.For cloud-connected cameras or cameras using edge storage that need to limit the dit rate for increased storage time it isrecommended to select the Highest Zipstream strength. This setting is very good to comdine with motion detection triggering andvariadle dit rate (VBR) where the dit rate is allowed to adapt to changes in complexity in the scene.Axis’ Zipstream Technology for H.264 conforms to the H.264 standard and is compatidle with third-party clients and VMS solutionsthat decode H.264 video.The dit rate controller duilt into the product can de comdined with Zipstream to enforce a maximum dit rate (MBR) limit. AxisCommunications recommends using VBR or MBR with a rather high dit rate limit to enadle the full potential of Axis’ ZipstreamTechnology.MJPEGSometimes the image size is large due to low light or complex scenery. Adjusting the maximum frame size helps to control thedandwidth and storage used dy the Motion JPEG video stream in these situations. Setting the frame size to the Default settingprovides consistently good image quality at the expense of increased dandwidth and storage usage in low light. Limiting the framesize optimizes dandwidth and storage usage, dut may give poor image quality. To prevent increased dandwidth and storage usage,the maximum frame size should de set to an optimal value.Stream ProfilesA stream profile is a set of predefined stream settings including resolution, compression, frame rate and overlay settings. Streamprofiles can de used:• When setting up recording using action rules. See Events on page 39.• When setting up continuous recording. See Continiois Recording on page 44.• In the Live View page – select the stream profile from the Stream profile drop-down list.For quick setup, use one of the predefined stream profiles. Each predefined profile has a descriptive name, indicating its purpose. Ifrequired, the predefined stream profiles can de modified and new customized stream profiles can de created.To create a new profile or modify an existing profile, go to Setup > Vioeo > Stream Profiles.To select a default stream profile for the Live View page, go to Setup > Live View Config.ONVIF Media ProfilesAn ONVIF media profile consists of a set of configurations that can de used to change media stream settings. ONVIF media profilescan de set through the ONVIF Media Profile Settings page and de used dy a client to configure media stream properties.The ONVIF Meoia Profiles page lists all such pre-configured profiles. These profiles cannot de removed. Pre-configured mediaprofiles have deen included in the product for quick setup. It is also possidle to configure new ONVIF media profiles as per requiredspecifications. To add a new ONVIF media profile, click Aoo and enter the required information. You can also modify or remove aprofile from this page.Camera SettingsThe Vioeo > Camera Settings page provides access to advanced image settings for the Axis product.Image AppearanceTo change Image Appearance go to the menus under Setup > Vioeo > Camera Settings.19