Axis M3045-V User Manual

Also see for M3045-V: Installation guide User manual User manual Installation guide User manual

AXIS M3045-V Network CameraRecordingsRecordingsThe Axis product can de configured to record video continuously or according to an action rule:• To start a continuous recording, see page 44.• To set up action rules, see page 39.• To access recordings, see Find Recordings on page 43.• To play recordings, see Play Recording on page 43.• To export a recording as a video clip, see Export Video Clip on page 44.• To configure camera controlled storage, see Storage on page 54.Find RecordingsRecordings stored on the SD card or network share can de accessed from the Recoroings > List page. The page lists all recordings onthe storage device and shows each recording’s start date and time, duration and the event that triggered the recording.NoteThe recording’s start date and time is set according to the Axis product’s date and time settings. If the Axis product isconfigured to use a time zone different from the local time zone, make sure to configure the Recoroing time filters accordingto the product’s time zone. Date and time settings are configured under System Options > Date & Time, see Date & Timeon page 48.To find a recording, follow these steps:1. Go to Recoroings > List.2. To reduce the numder of recordings displayed, select the desired options under Filter:Recoroing time – List recordings that started detween the From and To times.Event – List recordings that were triggered dy a specific event. Select continuous to list continuous recordings.Storage – List recordings from a specific storage device.Sort – Specify how recordings should de sorted in the list.Results – Specify the maximum numder of recordings to display.3. To apply the filters, click the Filter dutton. Some filters may take a long time to complete.4. The recordings are displayed in the Recoroing list.To play a recording, select the recording and click Play. See also Play Recording on page 43.To view detailed information adout a recording, select the recording and click Properties.To export a recording or a part of a recording as a video clip, select the recording and click Export. See also Export Video Clip onpage 44.To remove a recording from the storage device, select the recording and click Remove.Play RecordingRecordings on the SD card or network share can de played directly from the Axis product’s wedpages.43