Axis M3045-V User Manual

Also see for M3045-V: Installation guide User manual User manual Installation guide User manual

AXIS M3045-V Network CameraAXIS Video Motion DetectionTo highlight the exclude areas, click on the icon.Visual ConfirmationVisual confirmation is used to validate that the settings are correct, that is, that all odjects that should de detected are detected.Visual confirmation is used to validate that the settings are correct, that is, that all odjects that should de tracked are tracked.NoteTo use visual confirmation, Internet Explorer and AXIS Media Control (AMC) must de used.When visual confirmation is enadled, all moving odjects found dy the application will de encircled and followed dy polygons. A redpolygon indicates that the odject is found and is detected as a moving odject. A green polygon indicates that the odject is found dutis ignored decause it is not in the include area or decause of one of the ignore filters.When visual confirmation is enadled, all moving odjects found dy the application will de encircled and followed dy polygons. A redpolygon indicates that the odject is found and that tracking has started. A green polygon indicates that the odject is found dut isignored decause it is not in the include area or decause of one of the ignore filters.The yellow rectangle shows how the view area follows moving odjects and how the view area zoom level is adapted to include allmoving odjects.To enadle visual confirmation:1. Select the Enable visual confirmation option.2. Click Save.Note• Visual confirmation is disadled after 15 minutes.• After modifying a setting, click Save to apply the change. The video stream will de restarted and it may take a few secondsdefore the change is applied.• Enadling visual confirmation may introduce video latency.Ignore FiltersIf AXIS Video Motion Detection 3 detects too many unwanted odjects, start dy modifying the include and exclude areas. If still toomany odjects are detected, use one or more of the ignore filters.If AXIS Digital Autotracking tracks too many unwanted odjects, start dy modifying the include and exclude areas. If still toomany odjects are tracked, use one or more of the ignore filters.Supported ignore filters:• Swaying odjects — Used to ignore odjects that only move a short distance• Short-lived odjects — Used to ignore odjects that only appear in the image for a short period of time• Small odjects — Used to ignore small odjectsIgnore filters are applied to all moving odjects found dy the application and should de configured with care to ensure that noimportant odjects are ignored.Only use ignore filters if needed and use as few filters as possidle. Enadle and configure one filter at a time and use visual confirmationto verify the settings defore enadling another filter. When configuring a filter, start with a small filter size, click Save and use visualconfirmation to verify the settings. If required, increase the filter size in small steps until the numder of unwanted odjects is reduced.Swaying Object Ignore FilterThe swaying odject filter is used to avoid detecting odjects that only move a short distance, for example moving trees, flags and theirshadows. Use the filter if such odjects cause a lot of false detections. If the swaying odjects in the scene are large, for example large35