Axis P1353-E User Manual

Also see for AXIS P1353-E: Installation guide User manual Installation guide

About this documentThis manual is intended for administrators and users of the AXISP1353–E Network Camera, and is applicable to firmware 5.40 and later.It includes instructions for using and managing the product on yournetwork. Previous experience of networking will be of use when usingthis product. Some knowledge of UNIX or Linux-based systems may alsobe beneficial, for developing shell scripts and applications. Later versionof this document will be posted to the Axis website, as required. Seealso the product’s online help, available via the web-based interface.LiabilityEvery care has been taken in the preparation of this document. Pleaseinform your local Axis office of any inaccuracies or omissions. AxisCommunications AB cannot be held responsible for any technical ortypographical errors and reserves the right to make changes to theproduct and manuals without prior notice. Axis Communications ABmakes no warranty of any kind with regard to the material containedwithin this document, including, but not limited to, the impliedwarranties of merchantability and fitness for a particular purpose. AxisCommunications AB shall not be liable nor responsible for incidental orconsequential damages in connection with the furnishing, performanceor use of this material. This product is only to be used for its intendedpurpose.Intellectual Property RightsAxis AB has intellectual property rights relating to technology embodiedin the product described in this document. In particular, and withoutlimitation, these intellectual property rights may include one or moreof the patents listed at http://www.axis.com/patent.htm and one ormore additional patents or pending patent applications in the US andother countries.This product contains licensed third-party software. See the menu item“About” in the product’s user interface for more information.This product contains source code copyright Apple Computer,Inc., under the terms of Apple Public Source License 2.0 (seehttp://www.opensource.apple.com/apsl). The source code is availablefrom http://developer.apple.com/darwin/projects/bonjour/Equipment ModificationsThis equipment must be installed and used in strict accordance with theinstructions given in the user documentation. This equipment containsno user-serviceable components. Unauthorized equipment changes ormodifications will invalidate all applicable regulatory certificationsand approvals.Trademark AcknowledgmentsAXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX areregistered trademarks or trademark applications of Axis AB in variousjurisdictions. All other company names and products are trademarks orregistered trademarks of their respective companies.Apple, Boa, Apache, Bonjour, Ethernet, Internet Explorer, Linux,Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX, Windows, WindowsVista and WWW are registered trademarks of the respective holders.Java and all Java-based trademarks and logos are trademarks orregistered trademarks of Oracle and/or its affiliates. UPnPTM is acertification mark of the UPnPTM Implementers Corporation.SD, SDHC and SDXC are trademarks or registered trademarks of SD-3C,LLC in the United States, other countries or both. Also, miniSD, microSD,miniSDHC, microSDHC, microSDXC are all trademarks or registeredtrademarks of SD-3C, LLC in the United States, other countries or both.Regulatory InformationEuropeThis product complies with the applicable CE marking directivesand harmonized standards:• Electromagnetic Compatibility (EMC) Directive 2004/108/EC. SeeElectromagnetic Compatibility (EMC), on page 2 .• Low Voltage (LVD) Directive 2006/95/EC. See Safety, on page 2 .• Restrictions of Hazardous Substances (RoHS) Directive 2011/65/EU.See Disposal and Recycling, on page 2 .A copy of the original declaration of conformity may be obtained fromAxis Communications AB. See Contact Information, on page 3 .Electromagnetic Compatibility (EMC)This equipment has been designed and tested to fulfill applicablestandards for:• Radio frequency emission when installed according to theinstructions and used in its intended environment.• Immunity to electrical and electromagnetic phenomena wheninstalled according to the instructions and used in its intendedenvironment.USAThis equipment has been tested using a shielded network cable (STP)and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordancewith the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of thefollowing measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.CanadaThis Class B digital apparatus complies with Canadian ICES-003.EuropeThis digital equipment fulfills the requirements for RF emissionaccording to the Class B limit of EN 55022.This product fulfills the requirements for immunity accordingto EN 61000-6-1 residential, commercial and light-industrialenvironments.This product fulfills the requirements for immunity according toEN 61000-6-2 industrial environments.This product fulfills the requirements for immunity according toEN 55024 office and commercial environmentsAustralia/New ZealandThis digital equipment fulfills the requirements for RF emissionaccording to the Class B limit of AS/NZS CISPR 22.Japanこの装置は、クラスB 情報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。取扱説明書に従って正しい取り扱いをして下さい。Korea이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로 하며, 모든 지역에서 사용할 수 있습니다.SafetyThis product complies with IEC/EN/UL 60950-1 andIEC/EN/UL 60950-22, Safety of Information TechnologyEquipment.Disposal and RecyclingWhen this product has reached the end of its useful life, dispose ofit according to local raws and regulations. For information aboutyour nearest designated collection point, contact your local authorityresponsible for waste disposal. In accordance with local legislation,penalties may be applicable for incorrect disposal of this waste.EuropeThis symbol means that the product shall not be disposed oftogether with household or commercial waste. Directive 2012/19/EUon waste electrical and electronic equipment (WEEE) is applicable inthe European Union member states. To prevent potential harm tohuman health and the environment, the product must be disposedof in an approved and environmentally safe recycling process. Forinformation about your nearest designated collection point, contact