Axis P1353-E User Manual

Also see for AXIS P1353-E: Installation guide User manual Installation guide

AXIS P1353–E Network CameraSystem OptionsPort StatusThe list on the System Options > Ports & Devices > Port Status page shows the status of the product’s input and output ports.MaintenanceThe Axis product provides several maintenance functions. These are available under System Options > Maintenance.Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the currentsettings.Click Restore to reset most settings to the factory default values. The following settings are not affected:• the boot protocol (DHCP or static)• the static IP address• the default router• the subnet mask• the system time• the IEEE 802.1X settings• the focus position• uploaded applications are kept but must be restartedClick Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. TheAxis product can also be reset to factory default using the control button, see Reset to Factory Default Settings, on page 54.To identify the product or test the Status LED, click Flash LED under Identify and specify the duration in seconds, minutes or hours.This can be useful for identifying the product among other products installed in the same location.For information about firmware upgrade, see Upgrading the Firmware, on page 56.SupportSupport OverviewThe System Options > Support > Support Overview page provides information on troubleshooting and contact information,should you require technical assistance.See also Troubleshooting, on page 56.System OverviewTo get an overview of the Axis product’s status and settings, go to System Options > Support > System Overview. Information thatcan be found here includes firmware version, IP address, network and security settings, event settings, image settings and recent logitems. Many of the captions are links to the proper Setup page.Logs & ReportsThe System Options > Support > Logs & Reports page generates logs and reports useful for system analysis and troubleshooting. Ifcontacting Axis Support, please provide a valid Server Report with your query.System Log - Provides information about system events.Access Log - Lists all failed attempts to access the product. The Access Log can also be configured to list all connections to theproduct (see below).53