Axis P1353-E User Manual

Also see for AXIS P1353-E: Installation guide User manual Installation guide

AXIS P1353–E Network CameraEventsThe recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger timeand/or Post-trigger time and enter the number of seconds. When While the rule is active is enabled and the action is triggeredagain during the post-trigger time, the recording time will be extended with another post-trigger time period.For more information, see the online help .RecipientsRecipients receive media files and notification messages. The following recipients are available:Recipient Use with actionEmail Send ImagesSend NotificationFTP Send ImagesHTTP Send ImagesSend NotificationNetwork Share Send ImagesTCP Send NotificationNoteA network share can also be used as a storage device for recorded video. Go to System Options > Storage to configure anetwork share before setting up a continuous recording or an action rule to record video. See Storage, on page 51 for moreinformation about storage devices.To add a recipient:1. Go to Events > Recipients and click Add.2. Enter a descriptive name.3. Select a recipient Type.4. Enter the information needed for the recipient type.5. Click Test to test the connection to the recipient.6. Click OK.SchedulesSchedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outsideoffice hours. Use one of the predefined schedules or create a new schedule as described below.To create a new schedule:1. Go to Events > Schedules and click Add.2. Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule.3. Click OK.To use the schedule in an Action Rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page.41