Axis P1353-E User Manual

Also see for AXIS P1353-E: Installation guide User manual Installation guide

AXIS P1353–E Network CameraEventsEventsThe Axis product can be configured to perform actions when different events occur, for example, start a recording when motion isdetected. The set of conditions that defines how and when the action is triggered is called an Action Rule.Available Action Rule triggers and conditions include:• Applications — use installed applications to trigger the rule, see Applications, on page 38.• Detectors- Audio Detection — trigger the rule when audio is detected, see Audio Detection, on page 37.- Day/Night Mode — trigger the rule when the product switches between day mode (IR cut filter on) and nightmode (IR cut filter off). This can for example be used to control an external infrared (IR) light connectedto an output port.- Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 35.- Tampering — trigger the rule when tampering is detected, see Camera Tampering, on page 35.• Hardware- Network — trigger the rule if network connection is lost or restored. This can for example be used to startrecording to the SD card.- Temperature — trigger the rule if the temperature falls outside or inside the operating range of the product. Thiscan for example be used to send maintenance notifications.• Input Signal- Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see I/OPorts, on page 52.- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls onthe Live View Page, on page 14. This can for example be used to validate actions during product installationand configuration.• PTZ- Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be usedas an additional condition to prevent an action rule triggered by motion detection to record video while thecamera view moves due to a PTZ operation.- Preset Reached — trigger the rule when the camera stops at a preset position. This can be for example be usedwith the Send Images action to upload images from the preset position.• Storage- Available — trigger the rule when the storage device is unmounted or removed. This can for example beused to send maintenance notifications.- Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will beoverwritten to prevent the storage device from becoming full.- Locked — trigger the rule if the storage device is locked (write protected).• System- System Initializing — trigger the rule when the product is being started. This can for example be used to send anotification when the product restarts.• Time39