Features AW00123409000248 Basler ace USB 3.07.8.2 Binning on Color CamerasFor information about the availability of binning in color cameras, see Table 42 on page 192.Normal ImplementationFor color binning, pixel values for identical colors are binned vertically and/or horizontally.For vertical color binning, the gray values of adjacent pixels of the same color from 2 rows, 3 rows,or a maximum of 4 rows in the imaging sensor array are averaged and are reported out of thecamera as a single pixel. The number of binned pixels depends on the vertical color binning setting(see the example in Figure 94).As the gray values are averaged during vertical color binning and not summed, the signal to noiseratio will be increased while the camera’s response to light will not be increased.For horizontal color binning, the gray values of adjacent pixels of the same color from 2 columns,3 columns, or a maximum of 4 columns in the imaging sensor array are summed and are reportedout of the camera as a single pixel. The number of binned pixels depends on the horizontal colorbinning setting (see example in Figure 95).Fig. 94: Vertical Color Binning by 2Example:Vertical Color Binning by 2(Shown for 2 Columns)Fig. 95: Horizontal Color Binning by 2Example:Horizontal Color Binning by 2(Shown for 2 Rows)
