Tools for Changing Camera Parameters AW0012340900062 Basler ace USB 3.03.1.2 pylon USB ConfiguratorThe pylon USB Configurator is included in the Basler pylon Camera Software Suite besides theBasler pylon IP Configurator and the Basler pylon Camera Link Configurator. The pylon USBConfigurator is a standalone application. It allows you to obtain information about the architecture of the device tree to which your camera is connectedand about the USB devices, including your camera automatically generate support information for Basler technical support.For more information about generating support information, see Section 8.3 on page 351.For more information about using the pylon USB Configurator, see the Installation and Setup Guidefor Cameras Used with Basler pylon for Windows (AW000611).3.1.3 pylon SDKsThree pylon SDKs are part of the Basler pylon Camera Software Suite: pylon SDK for C++ (Windows and Linux) pylon SDK for C (Windows and Linux) pylon SDK for .NET / C# (Windows)Each SDK includes an application programming interface (API), a set of sample programs, anddocumentation: You can access all of the camera’s parameters and control the camera’s full functionality fromwithin your application software by using the matching pylon API (C++, C, or .NET). The sample programs illustrate how to use the pylon API to parameterize and operate thecamera. For each environment (C++, C, and .NET), a Programmer's Guide and ReferenceDocumentation is available. The documentation gives an introduction to the pylon API andprovides information about all methods and objects of the API.
