AW00123409000 Physical InterfaceBasler ace USB 3.0 715.6 Camera PowerCamera power must be supplied to the camera via the USB 3.0 cable plugged into the camera’sUSB 3.0 Micro-B port.Note that direct-coupled GPIO lines have the advantage of working with very shortdelays compared to opto-isolated I/O lines.Note also that the direct-coupled GPIOs are distinctly more susceptible to EMIthan the opto-isolated I/Os. Under harsh EMI conditions, GPIOs can turn out notto be usable at all.Accordingly, use of the GPIOs in an environment with elevated risk of EMI calls fortaking additional measures like, e.g. using shorter cables.DANGERElectric Shock HazardRisk of Burn or Death.The power supply used for supplying camera power must meet the Safety ExtraLow Voltage (SELV) and Limited Power Source (LPS) requirements.If you use a powered hub as part of the USB 3.0 connection, the powered hubmust meet the SELV and LPS requirements.WARNINGFire HazardRisk of BurnThe power supply used for supplying camera power must meet the Limited PowerSource (LPS) requirements.A suitable power supply is available from Basler. Contact your Basler salesrepresentative to order a power supply.If you use a powered hub as part of the USB 3.0 connection, the powered hubmust meet the LPS requirements.
