CASMED 740 MONITOR SERVICE MANUAL21-02-0174 REV. 02 05/0851Use the ARROW UP or ARROW DOWN pushbuttons to make your selection. Press one of theNEXT programmed pushbutton keys to advance to the next parameter to set within the Timemenu.NOTE:Altering the Date and Time will affect the History readings, but not erase them.Press one of the NEXT programmed pushbutton keys to advance onto the next menu or use theSTOP pushbutton to exit to the “Ready” mode.DAYLIGHT SAVING TIME OPTIONThe CASMED 740 Monitor can be configured to automatically respond to time changesassociated with Daylight Saving Time. The monitor can be configured to one of five DaylightSaving Time Option settings. They are:• DST OFF Daylight Saving Time is “OFF”. The user is responsible for changingthe time if needed. This is the default setting for the CASMED 740Monitor.• DST N AM Daylight Saving Time “North America”. Use this setting and themonitor will automatically change time accordingly to the DaylightSaving Time for countries in North America.• EU 1 Daylight Saving Time for all European countries using GreenwichMean Time.• EU 2 Daylight Saving Time for all European countries 1 hour ahead ofGreenwich Mean Time.• EU 3 Daylight Saving Time for all European countries 2 hours ahead ofGreenwich Mean Time.NOTE:Enabling Daylight Saving Time will affect the History readings, but not erase them.To configure the Daylight Saving Time option, first enter the monitor’s Configuration menu.Refer to Page 45, ENTERING THE MONITOR CONFIGURATION MENU.Once in the menu, use one of the NEXT programmed pushbutton keys until the MessageWindow displays the monitor’s current setting for Daylight Saving Time.Press one of the NEXT programmed pushbutton keys to advance onto the next menu or use theSTOP pushbutton to exit to the “Ready” mode.
