Cabletron Systems 9A656-04 Configuration Manual

Also see for 9A656-04: Hardware and installation guide Configuration guide Addendum

Contents

Cabletron Systems 9A656-04 Configuration Manual Manual pdf 125 page image

9A656-04/9A686-04 Configuration GuidePage 3-7ILMI Configuration Screen3.3 ILMI CONFIGURATION SCREENLocal management of the SmartSwitch 9500 allows the user to specify minimum andmaximum values for VCI and VPIs for all SVCs and SPVCs that the SmartSwitch 9500 willuse while establishing connections. Table 3-1 provides the default settings ILMI uses whenfirst connected to the ATM network. Table 3-2 displays the available range of VCI/VPI pairsthat ILMI may be configured to allow for requested connections.Table 3-1 Default Minimum and Maximum VCI and VPI Values for SVCs and SVPCsTable 3-2 Minimum and Maximum VCI and VPI RangesThe main purpose of the ILMI configuration screen is to limit the range of VPI/VCI pairs forSVC connections. In the default setting, there are no VPI/VCI pairs reserved for PVCs. Referto Figure 3-3.NOTE Section 2.16 in Chapter 2 describes how to use the ILMI Configuration screen tochange the settings from their default values.Minimum VCI for SVCs(MIN SVCC VCI field)33Maximum VPI for SVCs(MAX SVCC VPI field)4095Maximum VPI for VPCs(MAX SVPC VPI field)4095Type Minimum Value Maximum ValueVCI for SVCs 33 16kMaximum VPI for SVCs 0 4095Maximum VPI for VPCs 0 4095