General Configuration ScreenDLEHF-MA User’s Guide5-41ENABLED. For details about setting up the COM port, refer toSection 5.15.11.Application (Toggle)Displays the application set for the COM port. This field allows you to setthe application that the COM port will support, which includes:• Local Management (LM) via a terminal or modem connection• Uninterruptible Power Supply (UPS)The UPS setting allows you to use the COM port to monitor an AmericanPower Conversion Smart Uninterruptible Power Supply (UPS). For UPSconnections, the baud rate is automatically set to 2400.The baud rate setting for LM is automatically sensed.For details about how to configure the COM port for various applications,refer to Section 5.15.11.Clear NVRAM (Toggle)This allows the user to reset NVRAM to the factory default settings. Alluser-entered parameters, such as IP address and Community Names arethen replaced with DLEHF-MA default configuration settings. Fordetails, refer to Section 5.15.12.IP Fragmentation (Toggle)This field allows the user to enable or disable IP Fragmentation. Thedefault setting for this field is ENABLED. If traffic from the DLEHF-MAwill be bridged to an FDDI ring, IP Fragmentation should be enabled. IfIP Fragmentation is disabled, all FDDI frames that exceed the maximumEthernet frame size will be discarded. For details on enabling or disablingIP Fragmentation refer to Section 5.15.13.
