Chapter 5: Local Management5-100DLEHF-MA User’s Guide5.31 NETWORK TOOLSThe Network Tools function resides on the DLEHF-MA and allows theuser to access and manage network devices.To access the Network Tools Help screen, use the arrow keys to highlightthe NETWORK TOOLS menu item in the Module Menu screen andpress ENTER. Type in the word help at the -> prompt and press ENTER.The Network Tools screen shown in Figure 5-35 displays.Figure 5-35 Network Tools Help ScreenThe Network Tools functions are performed using a series of commands.Entering commands in Network Tools involves typing the command to beexecuted at the Network Tools prompt, adding any desired or requiredextensions, and pressing ENTER.There are two categories of commands in the command set.• Built-in Commands – Allow the user to access and manage networkdevices. The commands are arp, bridge, defroute, link_trap, netstat,ping, reset, show, soft-reset, telnet, traceroute, and atm_stp_state.• Special Commands – Allow the user to exit from Network Tools. Thecommands are done, exit, and quit.-> help236242arpnetstatshow traceroutedefrouteping resetbridgeSPECIAL:done, quit, or exit - Exit from the Network Tools.For help with a specific command, type 'help '.->Commands Available to UserBuilt in Commands:Welcome to Network Toolssoft_reset telnet link_trapatm_stp_state
