RMON Statistics ScreenDLEHF-MA User’s Guide5-95Interface [nn] (Command)This command is used to enter an interface number for viewing statistics.For instructions on how to use this command, refer to Section 5.29.1.CLEAR COUNTERS (Command)This command is used to reset all statistic counters to zero. For details onhow to use this field, refer to Section 5.29.2.5.29.1 Displaying Interface StatisticsTo display the statistics for any interface, proceed as follows:1. Use the arrow keys to highlight the Interface [nn] field at the bottomof the screen.2. Press the SPACE bar to increment (or press the DEL [delete] key todecrement) the interface number.3. Press ENTER (neither the Interface # fields nor the statistics willchange until ENTER is pressed).5.29.2 Using the Clear Counters CommandTo reset all the statistics counters of the selected interface to zero, performthe following steps:1. Use the arrow keys to highlight the CLEAR COUNTERS field.2. Press ENTER, the counters for the selected interface are reset to zero.5.30 RMON STATISTICS SCREENRMON statistics for each Fast Ethernet Interface Module, on ainterface-by-interface basis, are viewed through the RMON Statisticsscreen shown in Figure 5-34.To access the RMON Statistics screen, use the arrow keys to highlight theRMON STATISTICS menu item on the Module Statistics Menu screenand press ENTER. The RMON Statistics screen displays.
